Siding Contractors Richmond VA
Low-upkeep exteriors

Vinyl Siding Richmond VA

Tired of repainting wood siding every few years? Vinyl gives you a clean, low-upkeep exterior in dozens of colors.

Call (804) 292-2748
  • No repainting
  • Many colors and profiles
  • Wall checked before it's covered
Contractor preparing a wall for new vinyl siding

Vinyl Siding in Richmond VA

Starter strip and corner post going up over housewrap
Starter strip and corner posts set the lines for every panel

Vinyl is the most popular choice when the goal is to stop painting. It doesn't rot, it comes in many colors and profiles, and a wash now and then keeps it looking clean.

How it's installed matters more than the brand. Vinyl moves with heat and cold, so panels are hung loosely rather than nailed tight, with room at the ends to expand. Get that wrong and walls ripple on the first hot day.

A local siding contractor can show you profiles and colors and check the wall underneath before anything goes up.

Steps in a Typical Install

Remove and Inspect

Old siding comes off and soft sheathing is repaired.

Wrap and Flash

Housewrap and window flashing go on before the first panel.

Trim First

Starter strip, corner posts and J-channel set the lines.

Hang the Panels

Panels lock together and hang loose enough to move.

Richmond Vinyl Siding Profiles and Colors

Two-story home with straight vinyl courses and matching soffit

Most choices come down to the profile, the thickness and the color:

  • Traditional lap for a classic horizontal look.
  • Dutch lap for a deeper shadow line.
  • Board-and-batten for gables and accent walls.
  • Shake-style panels for a cedar look without the upkeep.

Vinyl installation in the area typically runs about $7,300 to $16,100. In historic districts, check with the city before planning vinyl; vinyl trim wrap isn't approved on historic buildings there.

Done painting your siding? Call about vinyl.

Call (804) 292-2748

Install Details

Cutting and snapping a vinyl panel into place
Panels cut and snapped into place
Vinyl corner post and J-channel with clean cuts
Corner post and J-channel with clean cuts
Two-story home with straight vinyl courses and matching soffit
Straight courses with matching soffit
Sill flashing integrated with housewrap before siding
Sill flashing tied into housewrap

Vinyl Questions

Why does vinyl siding get wavy?

Usually because it was nailed too tight or cut too tight at the trim, so it can't expand in the heat.

Can vinyl go over my old siding?

Sometimes, but removing the old siding lets the contractor check for moisture damage first.

How long does installation take?

It depends on the size of the house and how much wall repair turns up. The contractor gives you a timeline after seeing it.

Does vinyl need maintenance?

An occasional wash to remove dirt and mildew.

See Vinyl Options for Your House

A contractor near you can bring samples and price the job.

Call (804) 292-2748